SAFEWAY CONTRACTORS
Roofing | Masonry | Paving
Masonry

Masonry Repairs & Repointing across Ontario

Deteriorating mortar joints, cracked brick and spalling stone, properly repaired, matched to the original.

Overview

Why this service matters, and how we approach it.

Masonry is only as strong as its mortar joints. Once the joint surface weathers below the face of the brick, water starts sitting in the wall, accelerating freeze-thaw damage, efflorescence and eventual structural failure.

Our masonry crews are trained in traditional repointing and brick replacement. We match original mortar colour and profile, cut out failed joints to proper depth, and rebuild to exactly the right mix for your era of building.

Get a free estimate

Tell us about your project, we'll respond within one business day.

No deposit required
Pay on completion
Same-day call-outs
Free, no-obligation quotes
What's included

How we approach every masonry repairs & repointing project.

Repointing done right

Joints raked to 25mm minimum depth, flushed out, and repointed with a matched lime or cement mortar mix.

Brick replacement

Sourced to match colour, size and texture, salvage bricks where originals are unavailable.

Heritage-appropriate

Soft-lime mortar for pre-1920s buildings; we never use hard Portland mix on historic brick.

Structural repair

Stitching, pinning and rebuilds for cracked or bulging walls.

Our process

Four steps from quote to sign-off.

01

Survey

Assess extent of deterioration, identify era and match mortar analysis if needed.

02

Cut out

Mechanically rake failed joints to 25mm minimum depth without damaging brick faces.

03

Repoint

Flush, damp joints, apply matched mortar in two passes, tool to match profile.

04

Cure

Damp-cure for 3 to 5 days to prevent cracking; final inspection.

Masonry Repairs & Repointing gallery

Masonry Repairs & Repointing projects we have delivered.

Real jobs from our crews. Click any image to view full size.

Questions

Frequently asked about masonry repairs & repointing.

Still have a question? Give us a call, no-obligation advice is free.

647 8471 430
How do I know if my mortar needs repointing?
If you can scrape mortar out of the joints with a house-key, or the joint surface is recessed more than 6mm below the brick face, it needs repointing. We'll inspect free of charge.
Why does mortar matching matter?
Using a hard, modern Portland mix on soft old brick causes the brick faces to spall off in freeze-thaw cycles. We match mortar hardness to the brick.
Can you save the original brick or do we replace?
In most cases we retain 90%+ of the original brick, only severely spalled faces need replacement. We always prioritise salvage.
Can you match the original brick if some need replacing?
Yes. We source from Brampton Brick, Hanson, Belden and architectural salvage yards across Ontario.
How long does repointing last?
A properly executed repoint should last 40 to 60 years, often longer than the original mortar. Our repointing carries a 15-year workmanship warranty.

Ready to get started on your masonry repairs & repointing?

No deposit. Pay only when you are 100% satisfied. Free written quotes.